Imitation Turf to Save Water and Other Drought Tolerant Ideas

No matter how much rain you get, you still want to conserve as much water as you can. Conserving now means that you’d have more water later, if drought were to hit again or an existing drought were to become worse. Landscaping takes up the majority of the water used at a typical home, so adding drought-resistant plants and other landscaping like imitation turf cuts down significantly on the amount of water that you need to use.

 

Imitation Turf

One of the big sacrifices that people think they have to make if they switch to drought-resistant landscaping is the lawn. Grass does tend to suck up quite a bit of water, but if you place artificial turf in your yard, you’ll have a green lawn that does not need to be watered except to clean it off occasionally.

If you don’t want a huge lawn, but instead want only smaller pieces, liquidated turf might be a suitable choice. This is turf that is either used but not worn, or it’s the remnants cut from other turf that was trimmed to fit another piece of land.

Drought-resistant landscaping lets you maintain a nice yard even when water supplies are low. With native plants, rock gardens and artificial turf, you can create an oasis regardless of rainfall.

Use Native Plants

Plants that are native to the area in which you live are better able to handle the environmental conditions they encounter, including drought. In essence, the plants are used to the drought/rain cycle and can survive without a huge amount of water, though you may need to provide a minimal amount of supplemental water if there’s no rain. Local garden centers will be able to supply you with native plants that will grow well even in water-restricted conditions.

Install Rock Gardens

If you’re not partial to plant life, you may be interested in trying out a rock garden.

Rock gardens don’t require any maintenance or water, so this landscaping option relieves you of the weekly chores and dramatically reduces how much water you use each month.

Installing a rock garden, with rocks artfully placed in designs, helps protect the soil underneath them from hot sunlight. The soil dries out less and does not become blowing dust on a windy day.

 

 

Read more about Imitation Turf in these blog posts.

Imitation Turf vs Water, Maintenance, and Natural Lawn

Imitation Turf – The Benefits

Imitation Turf for Dogs – 5 Reasons Why It Is the Way to Go

Imitation Turf Landscaping Ideas for Small Backyards

Imitation Turf and More Simple Ways to Improve Front Yard Curb Appeal

Imitation Turf and Other Popular Drought Resistant Landscaping Ideas

Imitation Turf to Save Water and Other Drought Tolerant Ideas

Imitation Turf as a sustainable alternative

 

(ASTM D5848) – Product Weight
Total Product Weight: 91.10 oz/yd²
Pile Yarn Weight: 60.41 oz/yd²
Primary Backing Weight: 8.01 oz/yd²
Secondary Backing Weight: 22.68 oz/yd²

(ASTM D5793) – Stitch Count & Gauge
Result: 3.66 Stiches per inch | 1/2” Gauge

(ASTM D1335) Average Tuft Bind Strength
Result: 13.5 lbs/force

(ASTM D5034) – Average Grab Tear
Average Grab Tear-Length, MD: 278 lbs/force
Average Grab Tear-Width, CMD: 258 lbs/force

(ASTM D2859) – Pill Flammability
Result: 8 out of 8 Pass  | Meets 16CFR 1630

(ASTM F355-16e) – Gmax
Result: Gmax 138 / HIC 433

(EN 12616) – Permeability, Infiltrometer
Result: 57.0 inches / hr

(ASTM D3218) – Average Yarn Filament Thickness
Result: Mono 309 microns | 101 microns

(ASTM D2256) – Avg. Yarn Breaking Strength, Elongation
Result: Mono 21.4 lbs / force | Slit 14.9 lbs / force

(ASTM D1907) – Yarn Denier
Result: Mono 10950 | Slit 4789

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 70.65 oz/yd²  |  STC Standard 40 oz/yd²
Pile Yarn Weight: 35.43 oz/yd²  |  STC Standard +/- 10%

(ASTM D1335-17e1) Tuft Bind Strength
Result: 6.8 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.73 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 112.1 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80991H-01) – USGA Stimp Meter
Result: 8.5 Feet

(80991G-01) – Lisport, 1000 cycles

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 105.76 oz/yd²
Pile Yarn Weight: 75.35 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 264.1 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 99.54 oz/yd²
Pile Yarn Weight: 69.68 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 320.9 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 99.54 oz/yd²
Pile Yarn Weight: 69.68 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 320.9 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 99.54 oz/yd²
Pile Yarn Weight: 69.68 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 320.9 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 83.66 oz/yd²
Pile Yarn Weight: 49.20 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.8 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 331.3 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 83.66 oz/yd²
Pile Yarn Weight: 49.20 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.8 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 331.3 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 67.99 oz/yd²
Pile Yarn Weight: 37.84 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 11.3 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.68 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 19.6 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 9
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80991H-01) – USGA Stimp Meter
Result: 7.92 Ft. | 8.08 ft.

(80991G-01) – Lisport, 1000 cycles

(ASTM D 5848-20) – Product Weight
Total Product Weight: 44.80 oz/yd²
Pile Yarn Weight: 25.03 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 7.8 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 34.6 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 63.43 oz/yd²
Pile Yarn Weight: 41.35 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 9.5 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 80.6 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(ASTM D 5848-20) – Product Weight
Total Product Weight: 96.59 oz/yd²
Pile Yarn Weight: 67.19 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.4 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 89.8 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 109.22 oz/yd²
Pile Yarn Weight: 79.84 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 11.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 41.4 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTMD 5848-20) – Product Weight
Total Product Weight: 83.82 oz/yd²
Pile Yarn Weight: 56.67 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.3 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 44.7 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 71.58 oz/yd²
Pile Yarn Weight: 42.78 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 15.9 lbs/force |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 69.2 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 56.44 oz/yd²
Pile Yarn Weight: 32.01 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.1 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 65.7 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect

(80993G) – Lisport

(ASTM D 5848-20) – Product Weight
Total Product Weight: 79.80 oz/yd²
Pile Yarn Weight: 50.12 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 15.9 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 69.2 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(ASTM D 5848-20) – Product Weight
Total Product Weight: 93 oz/yd²
Pile Yarn Weight: 58.78 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 15.9 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 69.2 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

Full Testing Summary

(ASTM D 5848-20) – Product Weight
Total Product Weight: 96.94 oz/yd²
Pile Yarn Weight: 65.07 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 14.0 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 70.3 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport