5 Myths About Synthetic Turf Installation (And Why You Shouldn’t Believe Them)

There’s a good chance you’ve heard a thing or two about synthetic turf installation.

We understand synthetic grass isn’t for everyone, but we wanted to take a moment today to explore some of the more popular myths going around about synthetic grass. These are often based on opinion or dated perspectives.

Let’s take a closer look.

Synthetic Turf Installation Is Too Expensive

It’s true that installing artificial turf costs more money than it does to plant real grass seeds or to lay down sod.

If you have a large area to cover, the costs can add up very quickly. It’s months and years later when you notice the payoffs of installing synthetic turf. Because you don’t have to mow, fertilize or treat fake grass for pest insects, the money that you would spend on a lawnmower, maintenance, lawn products and other supplies stays in your pocket.

It Doesn’t Look Real

Artificial turf comes in varying lengths and gradients.

You can buy short, well-trimmed turf with a vibrant green color to mimic the look of a golf course. You can also buy it with longer blades and hints of yellows and various green hues to make it almost indistinguishable from real grass.

It Gets Too Hot to Touch

Real grass stays cooler to the touch even on the hottest days, so this myth does have some merit.

However, it doesn’t get so hot that you can’t stand on it; it might just feel less comfortable than stepping on real grass. Installing a hidden water system or a special padding beneath the turf will help to keep your feet cool on hot days. You can also opt for a lighter colored turf to help repel the sun’s rays and disperse some of the heat.

It Isn’t Good for Pets

On the contrary, you should install artificial grass if you have pets. If you run a doggy day care business, installing synthetic turf may save you money, time and headaches. According to one business owner in South Florida, artificial turf helped him increase his business by 250 percent. Synthetic grass doesn’t harbor fleas and ticks, doesn’t create muddy conditions after it rains and keeps the dogs clean no matter how much they run around.

It Doesn’t Require Any Upkeep

You may not have to mow your lawn anymore, but you still need to maintain it and remove debris every so often. If your dog uses the bathroom on the lawn, you will need to pick up the feces and dispose of it. An occasional rinsing with soap and water will keep the synthetic grass clean and remove any odors that may linger.

Don’t let the myths about synthetic grass keep you from enjoying it in your own yard. It not only eliminates most of your lawn care chores but also adds curbside appeal to your home.

Artificial Grass Liquidators provides high-quality artificial grass for landscaping, pets, and sports. Call 1-800-393-5869 to learn more, or connect with us on Facebook, Twitter, and Instagram to stay in touch. Visit our blog for landscaping and artificial grass tips.

© Artificial Grass Liquidators

(ASTM D5848) – Product Weight
Total Product Weight: 109.22 oz/yd²
Pile Yarn Weight: 79.84 oz/yd²
Primary Backing Weight: 8.01 oz/yd²
Secondary Backing Weight: 22.68 oz/yd²

(ASTM D5793) – Stitch Count & Gauge
Result: 3.66 Stiches per inch | 1/2” Gauge

(ASTM D1335) Average Tuft Bind Strength
Result: 13.5 lbs/force

(ASTM D5034) – Average Grab Tear
Average Grab Tear-Length, MD: 278 lbs/force
Average Grab Tear-Width, CMD: 258 lbs/force

(ASTM D2859) – Pill Flammability
Result: 8 out of 8 Pass  | Meets 16CFR 1630

(ASTM F355-16e) – Gmax
Result: Gmax 138 / HIC 433

(EN 12616) – Permeability, Infiltrometer
Result: 57.0 inches / hr

(ASTM D3218) – Average Yarn Filament Thickness
Result: Mono 309 microns | 101 microns

(ASTM D2256) – Avg. Yarn Breaking Strength, Elongation
Result: Mono 21.4 lbs / force | Slit 14.9 lbs / force

(ASTM D1907) – Yarn Denier
Result: Mono 10950 | Slit 4789

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 70.65 oz/yd²  |  STC Standard 40 oz/yd²
Pile Yarn Weight: 35.43 oz/yd²  |  STC Standard +/- 10%

(ASTM D1335-17e1) Tuft Bind Strength
Result: 6.8 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.73 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 112.1 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80991H-01) – USGA Stimp Meter
Result: 8.5 Feet

(80991G-01) – Lisport, 1000 cycles

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 105.76 oz/yd²
Pile Yarn Weight: 75.35 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 264.1 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 99.54 oz/yd²
Pile Yarn Weight: 69.68 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 320.9 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 99.54 oz/yd²
Pile Yarn Weight: 69.68 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 320.9 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 99.54 oz/yd²
Pile Yarn Weight: 69.68 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 320.9 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 83.66 oz/yd²
Pile Yarn Weight: 49.20 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.8 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 331.3 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 83.66 oz/yd²
Pile Yarn Weight: 49.20 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.8 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 331.3 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 67.99 oz/yd²
Pile Yarn Weight: 37.84 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 11.3 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.68 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 19.6 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 9
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80991H-01) – USGA Stimp Meter
Result: 7.92 Ft. | 8.08 ft.

(80991G-01) – Lisport, 1000 cycles

(ASTM D 5848-20) – Product Weight
Total Product Weight: 44.80 oz/yd²
Pile Yarn Weight: 25.03 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 7.8 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 34.6 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 75.90 oz/yd²
Pile Yarn Weight: 42.30 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 9.5 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 80.6 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(ASTM D 5848-20) – Product Weight
Total Product Weight: 96.59 oz/yd²
Pile Yarn Weight: 67.19 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.4 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 89.8 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 109.22 oz/yd²
Pile Yarn Weight: 79.84 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 11.5 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 41.4 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTMD 5848-20) – Product Weight
Total Product Weight: 83.82 oz/yd²
Pile Yarn Weight: 56.67 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.3 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 44.7 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 71.58 oz/yd²
Pile Yarn Weight: 42.78 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 15.9 lbs/force |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 69.2 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(FULL TESTING SUMMARY)

(ASTM D 5848-20) – Product Weight
Total Product Weight: 56.44 oz/yd²
Pile Yarn Weight: 32.01 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 10.1 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 65.7 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 10 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect

(80993G) – Lisport

(ASTM D 5848-20) – Product Weight
Total Product Weight: 71.58 oz/yd²
Pile Yarn Weight: 42.78 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 15.9 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 69.2 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

(ASTM D 5848-20) – Product Weight
Total Product Weight: 71.58 oz/yd²
Pile Yarn Weight: 42.78 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 15.9 lbs/force  |  STC Standard: 6.8 lbs/force

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 69.2 in/hr | STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Negligible or No Effect, 9 = Very Slight

(80993G) – Lisport

Full Testing Summary

(ASTM D 5848-20) – Product Weight
Total Product Weight: 96.94 oz/yd²
Pile Yarn Weight: 65.07 oz/yd²

(ASTM D1335-17e1) Tuft Bind Strength
Result: 14.0 lbs/force  |  STC Standard: 6.8 lbs/forceg

(ASTM F2765-14) – Lead Content
Result:  <0.5 mg/Kg  |  STC Standard: <100 mg/Kg

(ASTM D2859-16) – Pill Flammability
Result: 8 out of 8 Pass  |  STC Standard: 7 out of 8 Pass

(ASTM F1551-09) – Water Permeability
Result: 70.3 in/hr |STC Standard: Greater than 10 in/hr

(ASTM G154-16) – UV
Result: Color: 9 / Texture: 10
Ratings are on a grade scale of 1-10; 10 = Neglibible or No Effect, 9 = Very Slight

(80993G) – Lisport